2025 Fendt Former 14055 PRO

2025 Fendt Former 14055 PRO

Fendt Former Four-Rotor Hay Rake with or without ISOBUS

Experience the fourth dimension of the Fendt Formers with up to 13.80 m working width. With the PRO models, you have all the important machine parameters in view via the Vario-terminal thanks to state-of-the-art ISOBUS implement control. This means the best ergonomics and the greatest possible relief for the driver and saves time on the way to the next job. The transport height of less than 4 m, which you can maintain without removing the tine arms, also ensures comfortable and safe road transport.

One step ahead when it comes to comfort and efficiency

Fendt offers the right solution for everyone when it comes to 4-rotor hay rakes. You have the choice between the Fendt Former 14055 PRO machine with up to 13.8 m working width and the special proConnect ISOBUS functions, the ISOBUScontrolled Fendt Former 12545 PRO with max. 12.5 m working width, and the similar Fendt Former 12545 as a standard machine, which are controlled via two hydraulic control units and manual settings.

The new generation of the flagship hay rake

The powerful 14055 PRO former with the unique proCONNECT ISOBUS system impresses with high working speeds, consistently clean raking quality and maximum efficiency. The Fendt Former 14055 PRO was developed for high working speeds with consistently cleaner forage quality and a large working width. The unique Fendt proConnect ISOBUS system consists of the functions Fendt flexHIGH, gapControl. Well-known features such as the jet effect, adjustable cam track and cardanic suspension help to produce high quality green forage.

Automatically the right raking height

With the flexHIGH system, the Fendt Former 14055 PRO can be adjusted to the operating speed. When you drive faster, the resistance on the rotor at the front is increased by the larger volume of forage. This means that tines may be bent back and that the set operating height is not maintained. flexHIGH solves this problem by lowering the rotor slightly at higher speeds, therefore ensuring that no forage is left behind. The current position is always shown on the display via the position sensor. When standing, the rotor is raised so that the tines do not scrape the floor.

Features may include:

• All four rotors lower down to the pre-set clearance height

• All four rotors lower independent of the travel speed to below the pre-set clearance height

• All four rotors raise the tines above the pre-set clearance height